SPECIFICATION
product name: | humidity sensor |
Model: | SJL31SY |
version: | V1.0 |
Creator: | He Genwen |
reviewed by: | Yuan Chao |
This product is a resistance type polymer humidity sensor (SJL31SY), which has the characteristics of high humidity resistance, fast response speed, small humidity hysteresis, stable and reliable performance, good consistency and interchangeability. The product features compatibility with mainstream humidity sensors in the industry.
Unit: mm (tolerance: ± 0.5mm)
application area
Home appliance industry: air conditioning, humidification equipment, dehumidification equipment, air fresheners and other electrical appliances;
Industrial agriculture: atmospheric environment detection, industrial process control, measuring instruments, greenhouse planting, warehousing, food preservation, etc.
Gift industry: thermometers, electronic calendars, radio clocks (RCC), digital photo frames, home weather stations, etc;
Model SJL31SY;
The product meets ROHS and REACH environmental requirements.
5.1、Working voltage and frequency
working voltage:Vpp≤5.5V/AC;
Operating Frequency:0.5~2k Hz;
5.2、Working temperature and humidity
operation temperature:0~50℃;
Working humidity:20~95%RH;
5.3、Stability and temperature characteristics
stability:≤2%RH/year;
Temperature:≤0.5%RH/℃;
5.4、Humidity detection accuracy
measurement accuracy:≤±3%RH;
5.5、response speed
Response time: ≤ 20 seconds
5.5、water resistance
Soak in water for 10 minutes, after natural drying and recovery, humidity change ≤ 2% RH
Soak in water for 30 minutes, after natural drying and recovery, humidity change ≤ 5% RH
6.1、Temperature of 25 ℃ (± 1 ℃), measurement frequency of 1KHZ, set working voltage to 1V/AC (sine wave);
6.2、The testing equipment is an AC bridge (LCR) (note: ordinary multimeter resistance range testing cannot be used);
6.3、Using constant temperature and humidity chamber equipment: CZ-A-150F.
Refer to Attachment 1
Standard test conditions: ambient temperature of 25 ℃, measurement frequency of 1kHz, measurement voltage of 1V/AC (sine wave) as the reference. Characteristic testing: Before testing, place the humidity sensor in dry air at 25 ℃/30% RH for 30 minutes. The humidity generator will generate a humidity of 60% RH. After placing the humidity sensor for 30 minutes, measure the impedance value.
Testing device: LCR bridge (TH2810), constant temperature and humidity experimental box, handheld ROTRONIC high-precision temperature and humidity meter (± 1% RH)
Serial Number | project | test method | Standard value |
1 | Pin strength |
Pull the pin vertically in the direction of the 10N shell for 10 seconds | No damage, pin detachment, and normal electrical performance |
2 | impact resistance |
On a hard floor with a height of 1m, free fall 3 times | No damage, pin detachment, and normal electrical performance |
3 | Vibration resistance | Frequency 10-55Hz, amplitude 1.5mm (10~55~10Hz) in the X-Y-Z direction Vibration for 2 hours each | No damage, pin detachment, and normal electrical performance |
4 | soldering resistance | Immerse the sensor pins into a 350 degree tin bath, Pick up in 5 seconds and repeat twice; | ±5%RH within |
5 | cold resistance | Place in air for 1000 hours at temperatures below -10 ℃ | ±5%RH within |
6 | Moisture resistance | Temperature 50 ℃, humidity 90% RH Placed in the air for 1000 hours | ±5%RH within |
7 |
Temperature cycling | -Leave at 10 ℃ for 30 minutes, Heat up to 50 ℃/60% RH and let it stand for 30 minutes; Cycle 100 times |
±5%RH within |
8 | Humidity cycle | Place at 25 ℃ and 30% RH for 30 minutes, then transfer to 90% RH for 30 minutes and repeat 100 times |
±5%RH within |
9 | Solvent resistance | At room temperature, place the sensor in organic gas, alcohol, and acetone air for 30 minutes |
±5%RH within |
10 | Power on placement | Generally indoor (normal temperature and humidity) 1kHz, 5Vpp square wave, placed continuously for 1000 hours | ±5%RH within |
11 | water resistance | Soak in water for 30 minutes, let it dry and recover | ±5%RH within |
Note: 1. The standard value is the impedance of the humidity sensitive resistor measured in an environment of (25 ℃, 60% RH);
After each reliability test, place the sensor in air at room temperature and humidity for 24 hours, and then measure the humidity deviation corresponding to the impedance change.
9.1、The sensor without a shell is placed flat in a blister box, and one layer of blister box contains 50 sensors;
9.2、20 layers of blister boxes stacked together, with an empty blister box placed on top instead of the lid to prevent the sensor from falling off;
9.3、Wrap and fix with single-sided adhesive, and place it in a paper box; Paper box size (mm): L190 * W150 * H55, with a total of 1000 sensors;
9.4、Choose different sizes of cardboard boxes for packaging based on the order quantity;
9.5、Sensors with shells are packaged in bags;
license agreement
The above content is provided by Shenzhen Yuanjian Sensing Technology Co., Ltd. All rights reserved. Without the written permission of our company, no paragraph or chapter in this manual may be excerpted, copied, or copied or disseminated in any form. Otherwise, all consequences shall be borne by the violator, and our company reserves all legal rights.
Our company reserves the right to modify the product specifications described in the manual without prior notice.
warn
Use and personal injury
Do not use this product on safety protection devices or emergency stop devices, as well as in any application where failure of this product may cause personal injury; Before using this product, please carefully read the content in this manual;
Prohibit use near flammable gases
Prohibit use in places with flammable and explosive gases;
Do not directly touch the sensor
To prevent contamination of the moisture sensitive film and avoid direct finger contact with the surface of the components; Sweat can contaminate the moisture sensitive film and cause performance drift. When in contact with sensors, please wear anti-static finger covers; Avoiding chemical reactions
Avoid using in environments containing the following gases: salt, sulfur dioxide, halogen gases, ammonia, alcohol, ethylene glycol ether, aldehydes, etc;
work environment
Suggest using a temperature range of -10 ℃ -60 ℃ and a humidity range of 0-100% RH. Exceeding the recommended range may cause temporary drift in the measurement results; This product is not sensitive to light, but prolonged exposure to sunlight or ultraviolet radiation can also accelerate aging;
Three Guarantees Service
Under normal environmental conditions, this product promises three guarantees of service within one year.
0℃ | 5℃ | 10℃ | 15℃ | 20℃ | 25℃ | 30℃ | 35℃ | 40℃ | 45℃ | 50℃ | 55℃ | |
10%RH | 75142 | 68451 | 61200 | 53124 | 45124 | 39512 | 33154 | 29481 | 25412 | 21452 | 17854 | 15475 |
15%RH | 51242 | 43214 | 38412 | 30124 | 24123 | 20145 | 16458 | 13452 | 11012 | 9845 | 8147 | 6548 |
20%RH | 25704 | 20650 | 18240 | 14238 | 11000 | 8700 | 7238 | 5842 | 4899 | 4055 | 3226 | 2630 |
25%RH | 12589 | 9683 | 7514 | 6310 | 4615 | 3565 | 2954 | 2432 | 2000 | 1545 | 1212 | 933 |
30%RH | 6180 | 4688 | 3580 | 2880 | 2065 | 1530 | 1232 | 972.7 | 769.4 | 585.3 | 436.1 | 327.5 |
35%RH | 3048 | 2249 | 1587 | 1288 | 952.0 | 691.8 | 555.9 | 420.7 | 325.1 | 248.9 | 187.5 | 140.6 |
40%RH | 1503 | 1132 | 798.0 | 621.7 | 442.6 | 316.2 | 249.8 | 185.4 | 141.9 | 107.6 | 82.8 | 62.2 |
45%RH | 781.6 | 578.1 | 384.6 | 295.1 | 210.0 | 147.91 | 116.95 | 90.99 | 71.78 | 55.21 | 41.59 | 31.48 |
50%RH | 400.9 | 302.1 | 201.8 | 151.9 | 105.0 | 78.88 | 60.36 | 47.32 | 36.60 | 29.99 | 23.81 | 17.34 |
55%RH | 210.0 | 155.2 | 108.6 | 81.28 | 57.94 | 43.65 | 33.19 | 25.70 | 20.42 | 16.67 | 13.09 | 10.47 |
60%RH | 113.9 | 87.24 | 61.40 | 44.80 | 33.34 | 25.06 | 18.80 | 15.35 | 12.23 | 10.15 | 8.24 | 6.73 |
65%RH | 64.71 | 48.75 | 34.20 | 25.70 | 19.41 | 14.69 | 11.40 | 9.59 | 7.87 | 6.64 | 5.48 | 4.67 |
70%RH | 36.81 | 28.40 | 20.63 | 15.36 | 11.61 | 9.31 | 7.51 | 6.21 | 5.32 | 4.59 | 4.03 | 3.55 |
75%RH | 20.94 | 16.22 | 12.00 | 9.33 | 7.28 | 5.85 | 5.00 | 4.26 | 3.74 | 3.37 | 3.00 | 2.69 |
80%RH | 12.66 | 10.00 | 7.58 | 6.25 | 5.05 | 4.18 | 3.60 | 3.25 | 2.91 | 2.68 | 2.42 | 2.23 |
85%RH | 7.98 | 6.38 | 5.00 | 4.27 | 3.61 | 3.09 | 2.74 | 2.50 | 2.30 | 2.13 | 2.00 | 1.86 |
90%RH | 5.06 | 4.25 | 3.66 | 3.19 | 2.83 | 2.58 | 2.34 | 2.15 | 2.01 | 1.88 | 1.75 | 1.67 |
95%RH | 3.80 | 3.50 | 3.20 | 3.00 | 2.58 | 2.34 | 2.10 | 2.00 | 1.80 | 1.70 | 1.60 | 1.50 |
Attachment 1: SJL31SY Temperature and Humidity Characteristic Impedance Table
phone:0755-26588758 15013668479(倪先生) 13922884770(王先生)
fax:0755-26747274
mailbox:info@source-sensor.com
address:East 3rd Floor, Building 15, Majialong Industrial Zone, Nantou Street, Nanshan District, Shenzhen
Copyright©2002-2023 Yuanjian Sensing Technology . All Rights Reserved Copyright 粤ICP备17008245号-5 technical support:图页网 Website Map xml Website Map html